|
Detailed Programme |
| Wednesday, April 7th - 10:40 - 12:40 | ||
| Room N3 | MS11 - Composites forming processes | |
| Chair | R. Akkerman | |
| 1 | MS11-4 | Compressibility of CNT-grafted fibrous reinforcements: A theory |
| S. V. Lomov, V. Koissin, M. Karahan, A. Godara, L. Gorbatikh, I. Verpoest - stepan.lomov@mtm.kuleuven.be | ||
| 2 | MS11-13 | Technology route planning of large composite parts |
| K. Karjust, M. Pohlak, J. Majak - kristo@staff.ttu.ee | ||
| 3 | MS11-82 | Numerical simulation of Resin Transfer Molding using BEM and Level Set method |
| R. Gantois, A. Cantarel, G. Dusserre, J.-N. Félices, F. Schmidt - renaud.gantois@mines-albi.fr | ||
| 4 | MS11-87 | Modelling of the thermokinetic behaviour and the phases transitions of a carbon/polymeric composite submitted to high heating rate ramps. |
| C. Paris, P. A. Olivier, G. Bernhart - christophe.paris@mines-albi.fr | ||
| 5 | MS11-102 | Advantages of the meso/macro approach for the simulation of fibre composite reinforcements |
| S. Gatouillat, E. Vidal-Sallé, P. Boisse - Sebastien.Gatouillat@insa-lyon.fr | ||
| 6 | MS11-109 | Draping of non-crimp fabrics for fibre reinforced composites |
| M. Strauf Amabile, V. Eckers, T. Gries - marion.strauf@ita.rwth-aachen.de | ||
| Wednesday, April 7th - 10:40 - 12:40 | ||
| Room N4 | MS09 - Machining and cutting | |
| Chair | F. Micari | |
| 1 | MS09-24 | Experimental and numerical investigation on the delamination behaviour of PVD-coated tools in turning of austenitic steel |
| F. Klocke, S. Rizzuti, P. Frank, K. Gerschwiler, D. Lung, L. Settineri - stefania.rizzuti@polito.it | ||
| 2 | MS09-237 | Cutting of hollow profiles using pulse magnetic fields |
| Paul Maier-Komor, Hartmut Hoffmann, Martin Ostermair - pmk@utg.de | ||
| 3 | MS09-190 | In-line monitoring of cut surfaces in interrupted machining operations |
| P. Bosetti, S. Bruschi - paolo.bosetti@ing.unitn.it | ||
| 4 | MS09-235 | Analysis of Cutting Temperature in Drilling Process |
| T. Matsumura, I. Hori, T. Shirakashi - tmatsumu@cck.dendai.ac.jp | ||
| 5 | MS09-56 | A measuring device for experimental modal analysis of thin-walled workpieces on five-axis milling machines |
| P. Kersting, D. Biermann, A. Peuker - pkersting@isf.de | ||
| 6 | MS09-226 | Machinability in drilling - Mechanistic approach and new observer development |
| A. Arzur-Bomont, M. Confente, E. Schneider, O. Bomont, C. Lescalier - christophe.lescalier@metz.ensam.fr | ||
| Wednesday, April 7th - 10:40 - 12:40 | ||
| Room N5 | MS04 - Material behaviour And formability | |
| Chair | T. Kuwabara | |
| 1 | MS04-16 | A large-deformation multiplicative framework for anisotropic elastoplastic materials with application to sheet metal forming |
| I.N. Vladimirov, M. Schwarze, M.P. Pietryga, J. Frischkorn, S. Reese - ivaylo.vladimirov@tu-bs.de | ||
| 2 | MS04-19 | Experimental study of the effect of triaxiality ratio on the formability limit diagram and ductile damage evolution in steel and high purity copper |
| G. Chiantoni, N. Bonora, A. Ruggiero - gchiantoni@tenaris.com | ||
| 3 | MS04-210 | A new formulation of the Modified Maximum Force Criterion (MMFC) |
| L. Paraianu, G. Dragos, I. Bichis, D. S. Comsa, D. Banabic - banabic@tcm.utcluj.ro | ||
| 4 | MS04-31 | Sheet metal forming limit predictions based on advanced constitutive equations |
| M.C. Butuc, F. Barlat, J.J. Grácio, G. Vincze - cbutuc@ua.pt | ||
| 5 | MS04-41 | Evaluation of Charpy Impact Test Performance for Advanced High-Strength Steel Sheets Based on a Damage Model |
| N. Ma, T. Park, D. Kim, D.-Y. Seok, C. Kim, K. Chung - kchung@snu.ac.kr | ||
| 6 | MS04-65 | Finite element and analytical study of plane strain draw-bend failure of advanced high strength steels |
| J. H. Kim, J. H. Sung, D. K. Matlock, D. Kim, R. H. Wagoner - wagoner.2@osu.edu | ||
| Wednesday, April 7th - 10:40 - 12:40 | ||
| Room N6 | MS10 - Structures, properties and processing of polymers | |
| Chair | T. Riccò | |
| 1 | MS10-265 | Numerical modelling of polymers replication in micro-cavities by the roll embossing process |
| M. Sahli, J-C Gelin, T. Barrière - jean-claude.gelin@univ-fcomte.fr | ||
| 2 | MS10-39 | Process capability analysis in the manufacturing of PET bottles |
| M. Rujnić-Sokele, M. Šercer, D. Godec - mrujnic@fsb.hr | ||
| 3 | MS10-40 | Thermal properties of bio- and synthetic based PUR foams |
| M. Šercer, P. Raos, M. Rujnić-Sokele - msercer@fsb.fr | ||
| 4 | MS10-52 | Polymer rheology at high shear rate for microinjection moulding |
| C. Mnekbi, M. Vincent, J.F. Agassant - cheima.mnekbi@mines-paristech.fr | ||
| 5 | MS10-75 | Oscillating flow in capillary dies for a HDPE melt: effects of extrusion parameters |
| F. Baldi, A. Franceschini, F. Briatico-Vangosa, G. Locati, T. Riccò - francesco.baldi@ing.unibs.it | ||
| 6 | MS10-107 | Ultrasonic activation, a possible alternative application in the microinjection molding |
| T. Iclanzan, I. Serban, D. Rotar, V. Tut - ticlanzan@eng.upt.ro | ||
| Wednesday, April 7th - 10:40 - 12:40 | ||
| Room N7 | MS03 - Sheet metal forming | |
| Chair | T. Meinders | |
| 1 | MS03-68 | Finite Element optimization of deep drawing process parameters for magnesium alloys |
| V. B. Watiti, G. N. Labeas - vwatiti@mech.upatras.gr | ||
| 2 | MS03-74 | Influence of the variation of materials properties on the risk of failure in dependency of the materials flow condition during forming processes |
| G. Vera, M. Marion, O. Bernhard - v.goedel@lft.uni-erlangen.de | ||
| 3 | MS03-91 | Gurson-Twergaard-Needleman parameters identification using artificial neural networks in sheet metal blanking |
| H. Aguir, H. Marouani - haykel.marouani@enim.rnu.tn | ||
| 4 | MS03-92 | Numerical Simulation of Fracture in Cup Drawing |
| R. K. Saxena, S. S. Gautam, P. M. Dixit - rksaxena04@yahoo.com | ||
| 5 | MS03-160 | Finite element Analysis on the influence of material mechanical properties in local contact conditions |
| F.I. Pereira, M.C. Oliveira, A. Ramalho, J.L. Alves, L.F. Menezes, R. Padmanabhan - marta.oliveira@dem.uc.pt | ||
| 6 | MS03-305 | AZ31 Magnesium Deep Drawing Experiments and Finite Element Simulation |
| D. Ghaffari Tari, M. J. Worswick, J. Mckinley, R. Bagheriasl - dariushtari@hotmail.com | ||
| Wednesday, April 7th - 10:40 - 12:40 | ||
| Room N8 | MS19 - High temperature sheet forming | |
| Chair | S. Leen | |
| 1 | MS19-139 | Superplastic sheet metal forming with focus on the warm bulge test and its in-process monitoring |
| J. Kappes, S. Wagner, M. Schatz - Jens.Kappes@ifu.uni-stuttgart.de | ||
| 2 | MS19-152 | The influence of the material heat treatment and phase transformations in forming processes |
| A. Andrade-Campos - gilac@ua.pt | ||
| 3 | MS19-205 | Effects of dynamical deformation ageing on structure, texture and properties of hot rolled sheets from alloyed BCC metals |
| Yu. Perlovich, M. Isaenkova - perlovich@hotmail.com | ||
| 4 | MS19-206 | Texture layering in hot-rolled sheets from Zr-based alloys: causes, effects, control |
| M. Isaenkova, Yu. Perlovich, V. Fesenko, S. Kropachev, E. Aktuganova, S. Dryakhlov - isamarg@mail.ru | ||
| 5 | MS19-209 | Thermo-mechanical analysis and lifing of Ni-Cr SPF tool |
| A. A. Deshpande, S. B. Leen, W. Sun, T. H. Hyde - epxaad@nottingham.ac.uk | ||
| 6 | MS19-259 | A finite element analysis of errors in axisymmetric isothermal and Gleeble compression testing of Ti-6Al-4V |
| C. J. Bennett, S. B. Leen, P. H. Shipway - chris.bennett@nottingham.ac.uk | ||
| Wednesday, April 7th - 10:40 - 12:40 | ||
| Room SC | MS20 - Influence of curvature in formability limits in sheet forming | |
| Chair | A. Ofenheimer | |
| 1 | MS20-9 | Contact effects in bending affecting stress and formability |
| W.C. Emmens, A.H. van den Boogaard - w.c.emmens@utwente.nl | ||
| 2 | MS20-168 | A phenomenological Concepts To Predict Formability in Stretch-Bending Operations |
| D. Kitting, A. Ofenheimer, H. Pauli, E.T. Till - daniela.kitting@v2c2.at | ||
| 3 | MS20-173 | On the Use of Concave-Side Rule and Critical-Distance Methods to Predict the Influence of Bending on Sheet-metal Formability |
| C. Vallellano, D. Morales, A. J. Martinez, F. J. Garcia-Lomas - carpofor@us.es | ||
| 4 | MS20-236 | Novel semi-empirical model for forming limit prediction of sheet metal material with regard on effects of shear-tension loads |
| C. Held, M. Sindel, M. Liewald - christian.held@ifu.uni-stuttgart.de | ||
| 5 | MS20-241 | Development of an anisotropic failure criterion for characterising the influence of curvature on forming limits of aluminium sheet metal alloys |
| M. Liewald, R. Schleich - apostolos.papaioanu@ifu.uni-stuttgart.de | ||
| 6 | MS20-254 | Influence of punch radius in a Nakazima test for mild steel and aluminium |
| E. Fictorie, A.H. van den Boogaard, E.H. Atzema - a.h.vandenboogaard@utwente.nl | ||
| Wednesday, April 7th - 14:00 - 16:00 | ||
| Room N3 | MS11 - Composites forming processes | |
| Chair | J. Sherwood | |
| 7 | MS11-115 | On the equivalent in-plane permeability |
| F. Chinesta, A. Poitou, S. Chatel, J. A. Garcia, L. Gascon - Francisco.Chinesta@ec-nantes.fr | ||
| 8 | MS11-132 | Implementation of computer simulation for modeling arrangement of ceramic reinforcing particles during casting process of metal matrix composite |
| R. Zagórski - roman.zagorski@polsl.pl | ||
| 9 | MS11-136 | Adaptive remeshing of composite fabrics during the forming process |
| L. Giraud-Moreau, A. Cherouat, H. Borouchaki - laurence.moreau@utt.fr | ||
| 10 | MS11-148 | Reduction of automobile carbon dioxide emissions |
| A. Elalem, M. S. EL-Bourawi - abdelati.alem@gmail.com | ||
| 11 | MS11-163 | Characterization of contact tensions during continual and incremental forming of metal composites |
| R. Neugebauer, S. Meinel, R. Glaß, M. Popp - stefan.meinel@iwu.fraunhofer.de | ||
| 12 | MS11-169 | A New Procedure for the Analysis of Fibre Breakage After Processing of Fibre-Reinforced Thermoplastics |
| M. Berton, A. Cellere, G. Lucchetta - matteo.berton@unipd.it | ||
| Wednesday, April 7th - 14:00 - 16:00 | ||
| Room N4 | MS09 - Machining and cutting | |
| Chair | D. Umbrello | |
| 7 | MS09-249 | Simulation Of Mechanical Cutting Using A Physical Based Material Model |
| V. Kalhori, D. Wedberg, L.-E. Lindgren - Vahid.Kalhori@sandvik.com | ||
| 8 | MS09-224 | Modeling of the Temperature Field in the Chip and in the Tool in High-Speed Machining of a Carbon Steel: Effect of Pearlite to Austenite Phase Transition in AISI 1075 |
| T. J. Burns, S. P. Mates, R. L. Rhorer, E. P. Whitenton, D. Basak, R. H. McFadden - burns@nist.gov | ||
| 9 | MS09-77 | Finite element modeling and three-dimensional simulation of the turning process incorporating the material hardness |
| D. Biermann, F. Höhne, B. Sieben, A. Zabel - hoehne@isf.de | ||
| 10 | MS09-38 | Is it possible to identify Johnson-Cook law parameters from machining simulations? |
| A. Shrot, M. Bäker - a.shrot@tu-bs.de | ||
| 11 | MS09-122 | Flow stress determination in orthogonal cutting process combining the primary and the secondary shear zones. |
| G. M. Pittalà, M. Monno - gaetano.pittala@polimi.it | ||
| 12 | MS09-27 | On the identification conditions of a constitutive model in machining of AISI 1045 steel |
| C. Courbon, T. Mabrouki, J. Rech, J.-F. Rigal, D. Mazuyer, E. D’Eramo, P. Daguier - cedric.courbon@ec-lyon.fr | ||
| Wednesday, April 7th - 14:00 - 16:00 | ||
| Room N5 | MS04 - Material behaviour And formability | |
| Chair | F. Barlat | |
| 7 | MS04-88 | Evolving anisotropic yield loci based on multiple hardening curves |
| J. Mulder, H. Vegter - hans.mulder@corusgroup.com | ||
| 8 | MS04-99 | Error evaluation on experimental stress-strain curve obtained from tube bulging test |
| A. H. B. Ouirane, R. Velasco, G. Michel, N. Boudeau - nboudeau@ens2m.fr | ||
| 9 | MS04-113 | On material batch variation of the dual phase steel DP800 |
| Ø. Fyllingen, O.S. Hopperstad, V. Tarigopula - ofy@hib.no | ||
| 10 | MS04-130 | A New Approach in the Monitoring of Metal Coupon Subjected at Fatigue Load in Aggressive Solution |
| A. Astarita, A. Scala, A. Squillace, M. Iodice, T. Monetta, D.B. Mitton, F. Bellucci - antonello.astarita@hotmail.it | ||
| 11 | MS04-131 | Anisotropic and dissipative elasto-plastic materials with damaged structure |
| S. Cleja-Tigoiu - tigoiu@fmi.unibuc.ro | ||
| 12 | MS04-144 | Experimental analysis of the influence of stress concentrators on the buckling of woven materials under uniaxial tension |
| P. Bekampiene, J. Domskiene - paule.bekampiene@gmail.com | ||
| Wednesday, April 7th - 14:00 - 16:00 | ||
| Room N6 | MS10 - Structures, properties and processing of polymers | |
| Chair | F. Schmidt | |
| 7 | MS10-318 | Strain Field Measurement on 3D surfaces: Application to Petaloid Base of PET Bottles under Pressure |
| Luc Chevalier, Y. M. Luo, E. Monteiro - luc.chevalier@univ-mlv.fr | ||
| 8 | MS10-126 | Injection moulding of engineering rubber components: a comparison between experimental results and numerical simulation |
| G. Ramorino, M. Girardi, S. Agnelli, A. Franceschini, F. Viganò, T.Riccò - ramorino@ing.unibs.it | ||
| 9 | MS10-158 | Cooling Rate Influence in Bonded Magnet Injection Moulding |
| P. Carraro, G. Lucchetta - piertommaso.carraro@unipd.it | ||
| 10 | MS10-174 | Temperature wrinkling prediction in metal/polymer multilayer coatings |
| L. Zhang, A. Ben Bettaieb, A. M. Habraken, L. Duchêne - Amine.BenBettaieb@ulg.ac.be | ||
| 11 | MS10-186 | Characterization of hydrophobic polymeric membranes for membrane distillation process |
| G. A. Mannella, V. La Carrubba, V. Brucato - lacarrubba@dicpm.unipa.it | ||
| 12 | MS10-187 | Tubular scaffolds for vascular tissue engineering applications |
| V. La Carrubba, F. Carfì Pavia, V. Brucato - lacarrubba@dicpm.unipa.it | ||
| Wednesday, April 7th - 14:00 - 16:00 | ||
| Room N7 | MS03 - Sheet metal forming | |
| Chair | T. Welo | |
| 7 | MS03-5 | Flash Design of Die Shapes for Redrawing Rectangular Cups |
| K. Isobe - kisobe@toyama-nct.ac.jp | ||
| 8 | MS03-79 | Influence of production constraints on automatic generation of bead design |
| B. Krönauer, N. Majic, H. Hoffmann, A. Albers - bk@utg.de | ||
| 9 | MS03-129 | Influence of the punch geometry and sample size on the deep-drawing limits in expansion of an aluminium alloy |
| R. Boissière, P. Vacher, J.J. Blandin - remi.boissiere@iutnb.uhp-nancy.fr | ||
| 10 | MS03-171 | Finite element analysis of the influence of the restraining force in the draw-bend test |
| A. Kolevska, R. Padmanabhan, M.C. Oliveira, J.L. Alves, L.F. Menezes - padmanabhan@dem.uc.pt | ||
| 11 | MS03-242 | Optimization of thermally sprayed tool coatings for sheet drawing operations by roller burnishing |
| V. Franzen, M. Trompeter, A. Brosius, A. E. Tekkaya - volker.franzen@iul.tu-dortmund.de | ||
| 12 | MS03-288 | Further Development of the SCS Stretch-Forming Technology with assistance of Forming Simulation |
| A. Papaioanu, M. Liewald - apostolos.papaioanu@ifu.uni-stuttgart.de | ||
| Wednesday, April 7th - 14:00 - 16:00 | ||
| Room N8 | MS01 - Inverse analysis optimization and stochastic approaches | |
| Chair | T. Van den Boogaard | |
| 1 | MS01-17 | Metamodel assisted Evolutionary Algorithm for Multi-Objective Optimization of Non-steady Metal Forming Problems |
| M.Ejday, L. Fourment - lionel.fourment@mines-paristech.fr | ||
| 2 | MS01-180 | Reliability Based Economical optimization of Sheet Metal Forming Processes |
| M. Strano - matteo.strano@polimi.it | ||
| 3 | MS01-42 | A methodology for the design of effective cooling system in injection moulding |
| A.Agazzi, V.Sobotka, R. Le Goff, D.Garcia, Y.Jarny - alban.agazzi@univ-nantes.fr | ||
| 4 | MS01-69 | Application of a genetic algorithm for the assessment of the capabilities of actuator systems for laser micro adjustment |
| R. Plettke - plettke@lft.uni-erlangen.de | ||
| 5 | MS01-89 | Design of complex sheet metal forming processes: a new computer aided progressive approach |
| G. Ingarao, R. Di Lorenzo - p.ingarao@dtpm.unipa.it | ||
| 6 | MS01-123 | Iterative learning and feedback control applied on a deep drawing process. |
| B. Endelt, J. Danckert - endelt@production.aau.dk | ||
| Wednesday, April 7th - 14:00 - 16:00 | ||
| Room SC | MS12 - Semi-solid processes | |
| Chair | D. Barabazon | |
| 1 | MS12-327 | Development of industrial components by advanced squeeze casting |
| M. Rosso, I. Peter, C. Bivol, R. Molina, G. Tonno - mario.rosso@polito.it | ||
| 2 | MS12-323 | Benefits of thixoforming hot-crack-sensitive aluminum alloys at high solid fraction |
| G. Vaneetveld, A. Rassili, J. C. Pierret, J. Lecomte-Beckers - g.vaneetveld@ulg.ac.be | ||
| 3 | MS12-232 | Characterization of the after thixoforming microstructure of a 7075 aluminium alloy gear |
| Ł. Rogal, J. Dutkiewicz, A. Góral, B. Olszowska-Sobieraj, J. Dańko - lukaszrogal@wp.pl | ||
| 4 | MS12-231 | Surface finish effect on the anodizing behaviour of Al-Si components obtained by Sub-Liquidus Casting process. |
| S. Menargues, J.A. Picas, E. Martin, M.T. Baile, M. Campillo, A. Forn - sergi.menargues@upc.edu | ||
| Wednesday, April 7th - 16:30 - 17:50 | ||
| Room N3 | MS11 - Composites forming processes | |
| Chair | F. Chinesta | |
| 13 | MS11-178 | Prediction of braid deformability during the RTM Process |
| A. Telmar, R. Agogue, D. Soulat, G. Hivet, D. Zanelli - aurelie.telmar@univ-orleans.fr | ||
| 14 | MS11-201 | FE-Modelling of the Rubber Mould Behaviour during Press Forming of Thermoplastic Composites |
| V. Antonelli, R. Marissen - antonelli@llb.mw.tum.de | ||
| 15 | MS11-214 | Benchmark Study of Finite Element Models for Simulating the Thermostamping of Woven-Fabric Reinforced Composites |
| J. Sargent, J. Chen, J. Sherwood, J. Cao, P. Boisse, A. Willem, K. Vanclooster, S. Lomov, M. Khan, T. Mabrouki, K. Fetfatsidis, D. Jaufrrès - james_sherwood@uml.edu | ||
| 16 | MS11-216 | Using Modal Analysis to Investigate the Validity of Finite Element Models for Simulating the Thermostamping of Woven-Fabric Reinforced Composites |
| J. Sherwood, K. Fetfatsidis, D. Winchester, D. Jauffrès, P. Avitabile, J. Chen - james_sherwood@uml.edu | ||
| Wednesday, April 7th - 16:30 - 17:50 | ||
| Room N4 | MS09 - Machining and cutting | |
| Chair | P. Arrazola | |
| 13 | MS09-310 | Influence of material parameters on serrated chip prediction in finite element modeling of chip formation process |
| P. J. Arrazola, O. Barbero, I. Urresti - pjarrazola@eps.mondragon.edu | ||
| 14 | MS09-344 | Finite element formulation effect in three-dimensional modeling of a chip formation during machining |
| B. Haddag, S. Atlati, M. Nouari, M. Znasni - badis.haddag@insic.fr | ||
| 15 | MS09-23 | Finite element analysis of residual stresses in machining |
| S. Rizzuti, D. Umbrello, L. Filice, L. Settineri - stefania.rizzuti@polito.it | ||
| 16 | MS09-275 | Modeling and Experimental Validation of the surface Residual Stresses Induced by Hard Machining of AISI H13 Tool Steel |
| S. Caruso, J. C. Outeiro, D. Umbrello, R. M’Saoubi - serafino.caruso@unical.it | ||
| Wednesday, April 7th - 16:30 - 17:50 | ||
| Room N5 | MS04 - Material behaviour And formability | |
| Chair | S. Dancette | |
| 13 | MS04-145 | Microstructure evolution during hot deformation of Ti-6Al-4V double cones specimens |
| F. Warchomicka, C. Poletti, M. Stockinger, T. Henke - fwarchom@pop.tuwien.ac.at | ||
| 14 | MS04-149 | An effective warm forming process;numerical and experimental study |
| B. Bagheriasl, M. Worswick, J. Mckinley, H. Simha - rbagheri@uwaterloo.ca | ||
| 15 | MS04-155 | Bending limit prediction of an aluminum thin sheet |
| S. Thuillier, N. Le Maoût, P.Y. Manach - sandrine.thuillier@univ-ubs.fr | ||
| 16 | MS04-166 | New anisotropic strain-rate potential for hexagonal metals |
| O. Cazacu, J-H. Yoon, J-W. Yoon - cazacu@reef.ufl.edu | ||
| Wednesday, April 7th - 16:30 - 17:50 | ||
| Room N6 | MS10 - Structures, properties and processing of polymers | |
| Chair | G. Menary | |
| 13 | MS10-320 | Thermoforming of Knitted Composite Structures: FEM Simulation and Experiments |
| B.Bekisli, H.F.Nied - hfn2@lehigh.edu | ||
| 14 | MS10-188 | A pre-vascularized PLLA scaffold for regeneration of complex tissues |
| F. Carfì Pavia, V. La Carrubba, G. Ghersi, V. Brucato - lacarrubba@dicpm.unipa.it | ||
| 15 | MS10-189 | Mechanical investigation of the healing phenomenon of the PMMA |
| N. Aleksy, G. Kermouche, J.M. Bergheau, J.L. Loubet, S. Pavan - nicolas.aleksy@enise.fr | ||
| 16 | MS10-212 | Material parameter identification for vacuum infusion manufactured components |
| F. Avalos, G. Pincheira, J. Inostroza, P. Flores - pfloresv@udec.cl | ||
| Wednesday, April 7th - 16:30 - 17:50 | ||
| Room N7 | MS03 - Sheet metal forming | |
| Chair | T. Meinders | |
| 13 | MS03-48 | Multi-material FEM approach for the prediction of the behaviour of draw-bended tubular profiles |
| A. Mentella, M. Strano, M. Skrikerud - alessia.mentella@unicas.it | ||
| 14 | MS03-76 | Determining curvature of air bended parts by digital image processing |
| M.L. Garcia-Romeu, J.A. Mayugo, J. Ciurana - mluisa.gromeu@udg.edu | ||
| 15 | MS03-114 | On the modeling of the unloading behavior of metal sheets |
| P-A. Eggertsen, K. Mattiasson - kjellm@chalmers.se | ||
| 16 | MS03-336 | Modelling and Validation of Springback in Aluminium U-Profiles |
| M. Stanton, I. Masters, R. Bhattacharya, G. Williams, I. Dargue, R. Aylmore - M.Stanton@warwick.ac.uk | ||
| Wednesday, April 7th - 16:30 - 17:50 | ||
| Room N8 | MS01 - Inverse analysis optimization and stochastic approaches | |
| Chair | L. Fourment | |
| 7 | MS01-124 | Inverse identification of advanced yield criteria using cup drawing and tensile tests |
| M.-S. Aydın, J. Gerlach, L. Kessler - mustafa-seckin.aydin@thyssenkrupp.com | ||
| 8 | MS01-154 | On the objective function evaluation in parameter identification of material constitutive models - Single point or FE analysis |
| R. de-Carvalho, R.A.F. Valente, A. Andrade-Campos - raquelsoares@ua.pt | ||
| 9 | MS01-162 | Identification of CRIMS model parameters for warpage prediction in injection moulding simulation |
| A. Cellere, G. Lucchetta - giovanni.lucchetta@unipd.it | ||
| 10 | MS01-25 | Sheet forming optimization based on least square support vector regression and intelligent sampling approach |
| Hu Wang, Guangyao Li2 - wanghuenying@hotmail.com | ||
| Wednesday, April 7th - 16:30 - 17:50 | ||
| Room SC | MS12 - Semi-solid processes | |
| Chair | A. Pola | |
| 5 | MS12-312 | Yield stress phenomena in semi-solid alloys |
| A. Moll, M. Modigell - axel.moll@avt.rwth-aachen.de | ||
| 6 | MS12-286 | A generalized viscoelastic Maxwell model for semi-solid thixotropic alloys. |
| J. Petera, K. Kaminski, M. Kotynia - jerzy.petera@p.lodz.pl | ||
| 7 | MS12-179 | The effect of injection conditions on the structural integrity of the components produced by Semi-Solid Rheocasting |
| M. Campillo, M. T. Baile, S. Menargues, A. Forn - manel.campillo@upc.edu | ||
| 8 | MS12-58 | New Zinc alloys for semisolid applications |
| A. Pola, R. Roberti, L. Montesano - annalisa.pola@ing.unibs.it | ||
| Thursday, April 8th - 9:00 - 10:20 | ||
| Room N3 | MS11 - Composites forming processes | |
| Chair | P. Boisse | |
| 17 | MS11-218 | Development of a polyisomorfism for a polypropylene copolimer and its organic-inorganic nanocomposite preparation |
| Y. P. Seo, K. Oh, Y. Seo, S. M. Hong - ysseo@snu.ac.kr | ||
| 18 | MS11-238 | Simulation of multi-layered composites forming |
| K. Vanclooster, S. V. Lomov, I. Verpoest - kristof.vanclooster@mtm.kuleuven.be | ||
| 19 | MS11-251 | Use of numerical simulation of woven reinforcement forming at mesoscale: influence of transverse compressiono on the global response |
| E. Vidal-Sallé, Q. T. Nguyen, A. Charmetant, J. Bréard, E. Maire, P. Boisse - emmanuelle.vidal-salle@insa-lyon.fr | ||
| 20 | MS11-279 | Warpage of flat composite part induced by Liquid Resin Infusion (LRI) processes |
| H.-F. Perrin, A. D'Acunto, P. Martin - henry.perrin@ensam.eu | ||
| Thursday, April 8th - 9:00 - 10:20 | ||
| Room N4 | MS09 - Machining and cutting | |
| Chair | P. Lorong | |
| 17 | MS09-93 | Roughness Improvement in Machining Operations Through coupled Metamodel and Genetic Algorithm Technique |
| A. Del Prete, A. A. De Vitis, A. Anglani - antonio.delprete@unisalento.it | ||
| 18 | MS09-94 | Experimental development of RSM techniques for surface quality prediction in metal cutting applications |
| A. Del Prete, A. A. De Vitis, A. Spagnolo - antonio.delprete@unisalento.it | ||
| 19 | MS09-51 | FE modeling of microstructural changes in hard turning of AISI 52100 steel |
| G.L. Manco, S. Caruso, G. Rotella - leonardo.manco@unical.it | ||
| 20 | MS09-332 | Numerical modelling of high speed broaching multitoothes broaches |
| V. F. Makarov, V. R. Tuktamyshev - tms3@pstu.ru | ||
| Thursday, April 8th - 9:00 - 10:20 | ||
| Room N5 | MS04 - Material behaviour And formability | |
| Chair | J. H. Yoon | |
| 17 | MS04-176 | A Numerical Simulation Study of Deep Drawing Testing and Experimental Results of Steel Sheets, Using a Comercial Software |
| J. D. Bressan, J. C. Cieto, F. H. Vieira, L. S. B. Bastos, P. A. M. Rojas - dem2jdb@joinville.udesc.br | ||
| 18 | MS04-177 | A Shear Fracture Criterion to Predict Limit Strains in Sheet Metal Forming |
| J. D. Bressan, F. Barlat - dem2jdb@joinville.udesc.br | ||
| 19 | MS04-202 | Remarks upon the algebraic structure of some recently proposed anisotropic yield functions |
| S. Soare, F. Barlat - stef_soare@yahoo.com | ||
| 20 | MS04-21 | Study on y-shape tube hydroforming of magnesium alloys at elevated temperatures |
| Y.M. Hwang, K.H. Wang - ymhwang@mail.nsysu.edu.tw | ||
| Thursday, April 8th - 9:00 - 10:20 | ||
| Room N6 | MS10 - Structures, properties and processing of polymers | |
| Chair | G. Menary | |
| 17 | MS10-322 | A monolithic finite element approach to compute permeability at microscopic and mesoscopic scales in LCM processes |
| L. Silva, G. Puaux, M. Vincent, P. Laure - Luisa.Silva@mines-paristech.fr | ||
| 18 | MS10-217 | Reactive Interfacial Adhesion between Surface-modified Polystyrene and a Polyamide (nylon 6) |
| Y. Seo, S. M. Hong - ysseo@snu.ac.kr | ||
| 19 | MS10-219 | Curing simulation of composites coupled with infrared heating |
| S. Nakouzi, J. Pancrace, F.M. Schmidt, Y. Le Maoult, F. Berthet - fabrice.schmidt@mines-albi.fr | ||
| 20 | MS10-227 | Instrumentation and Modelling of the Stretch Blow Moulding Process |
| Yannis M. Salomeia, Gary H. Menary, Cecil G. Armstrong - ysalomeia01@qub.ac.uk | ||
| Thursday, April 8th - 9:00 - 10:20 | ||
| Room N7 | MS03 - Sheet metal forming | |
| Chair | T. Welo | |
| 17 | MS03-34 | Optimisation of can bottom geometry by means of simulations |
| E. Ceretti, D. Braga, C. Giardini, G. Gerbino - claudio.giardini@unibg.it | ||
| 18 | MS03-112 | Numerical simulation research on a new spinning process: double-roller clamping spinning process |
| Q. Zhang, S. Q. Fan, S. D. Zhao, C. H. Wang - henryzhang@mail.xjtu.edu.cn | ||
| 19 | MS03-125 | Investigation of twist in curved hat channel products by elastic-plastic finite element analysis |
| M. Takamura, M. Sakata, A. Fukui, T. Hama, Y. Miyoshi, H. Sunaga, A. Makinouchi, M. Asakawa - takamura@riken.jp | ||
| 20 | MS03-285 | Development and validation of a numerical model for sheet metal roll forming |
| J. Larra˜naga, L. Galdos, L. Uncilla, A. Etxaleku - jlarranaga@eps.mondragon.edu | ||
| Thursday, April 8th - 9:00 - 10:20 | ||
| Room N8 | MS01 - Inverse analysis optimization and stochastic approaches | |
| Chair | M. Strano | |
| 11 | MS01-183 | Statistical Analysis and Robust Optimization of Forming Processes and Forming-to-Crash Process Chains |
| T. Clees, D. Steffes-lai, M. Helbig, D.-Z. Sun - tanja.clees@scai.fraunhofer.de | ||
| 12 | MS01-195 | On an innovative optimization approach for the design of cross-section profiles for integrally stiffened panels subjected to elasto-plastic buckling deformation modes |
| J.F. Caseiro, R.A.F. Valente, A. Andrade-Campos, J.W. Yoon - jfmcaseiro@ua.pt | ||
| 13 | MS01-326 | Automatic optimization techniques applied to a large range of industrial test cases |
| R.Ducloux, L. Fourment, S. Marie, D. Monnereau - richard.ducloux@transvalor.com | ||
| Thursday, April 8th - 9:00 - 10:20 | ||
| Room SC | MS06 - Forging and rolling | |
| Chair | B. A. Behrens | |
| 1 | MS06-12 | Research into water-based colloidal-grphite lubricants for forging of carbon steels and Ni-based alloys |
| A. Petrov, P. Petrov, M. Petrov - petrov_p@mail.ru | ||
| 2 | MS06-28 | Numerical simulation of friction during forging operations - a mesoscopic analysis |
| E. Vidal-Sallé, M. Dubar, J-C. Boyer, L. Dubar - emmanuelle.vidal-salle@insa-lyon.fr | ||
| 3 | MS06-47 | Shape complexity factor for closed die forging |
| B. Tomov, R. Radev - rradev@ru.acad.bg | ||
| 4 | MS06-57 | 3D simulation and optimization of a hot ring rolling industrial process |
| E. Ceretti, C. Giardini, L. Giorleo - luca.giorleo@ing.unibs.it | ||
| Thursday, April 8th - 10:45 - 12:45 | ||
| Room N3 | MS11 - Composites forming processes | |
| Chair | S. Lomov | |
| 21 | MS11-287 | Weld strength assesment for tape placement |
| W. J. B. Grouve, L. Warnet, R. Akkerman, S. Wijskamp, J. S. M. Kok - w.j.b.grouve@utwente.nl | ||
| 22 | MS11-316 | Online Measurement of a Resin Infusion Flow Variables Using Artificial Vision Technologies |
| U. Pineda, N. Montés, L. Domenech, F. Sánchez - upineda@uch.ceu.es | ||
| 23 | MS11-335 | Finite Element Simulations of Laminated Composites Forming Processes |
| R. H. W. Ten Thije, R. Akkerman - r.h.w.tenthije@utwente.nl | ||
| 24 | MS11-340 | Experimental and numerical analyses of 3D Interlock Composite Preforming |
| E. De Luycker, J. G. Orliac, F. Morestin, P. Boisse, D. Marsal, S. Otin - philippe.boisse@insa-lyon.fr | ||
| 25 | MS11-342 | A Simple Anisotropic Fiber Reinforced Hyperelastic Constitutive Model for Woven Composite Fabrics |
| X. Q. Peng, Z. Y. Guo, Zia-Ur-Rehman, P. Harrison - xqpeng@nwpu.edu.cn | ||
| 26 | MS11-347 | Modeling strategies for fabrics unit cell geometry-Application to permeability simulations |
| G. Hivet, A. Wendling, E. Vidal-Salle, B. Laine, P. Boisse - gilles.hivet@univ-orleans.fr | ||
| Thursday, April 8th - 10:45 - 12:45 | ||
| Room N4 | MS09 - Machining and cutting | |
| Chair | T. Matsumura | |
| 21 | MS09-248 | High pressure water jet assisted machining of duplex steel: machinability and tool life |
| T. Braham-Bouchnak, G. Germain, P. Robert, J. L. Lebrun - braham.tarek@gmail.com | ||
| 22 | MS09-59 | Formation of white and dark layers in hard cutting: influence of tool wear |
| C. Cappellini, A. Attanasio, G. Rotella, D. Umbrello - cristian.cappellini@ing.unibs.it | ||
| 23 | MS09-85 | A new method for detecting tool wear and breakage in milling |
| F. Girardin, D. Rémond, J.-F. Rigal - francois.girardin@insa-lyon.fr | ||
| 24 | MS09-1 | Tool flank wear analyses on AISI 440C martensitic stainless steel by turning |
| S .Hasan, S. Thamizhmanii - thamizhmaniis@yahoo.com | ||
| 25 | MS09-106 | Performance of Carbide Cutting Tools when Machining of Nickel Based Alloy |
| M. M. Noor, K. Kadirgama, H. H. Habeeb, M. M. Rahman, B. Mohammad - muhamad@ump.edu.my | ||
| 26 | MS09-108 | Optimized Tool life by Partial Swarm Optimization |
| K. Kadirgama, M. M. Noor, M. M. Rahman, M. S. M. Sani, K. A. Abou-El-Hossein - muhamad@ump.edu.my | ||
| Thursday, April 8th - 10:45 - 12:45 | ||
| Room N5 | MS04 - Material behaviour And formability | |
| Chair | D. Banabic | |
| 21 | MS04-228 | Hole Expansion of Advanced High Strength Steel Sheet Sample |
| L. Xu, L. Chen, B. C. De Cooman, D. Steglich, F. Barlat - xule.joy@postech.ac.kr | ||
| 22 | MS04-246 | Multisite model prediction of texture induced anisotropy in brass |
| S. Dancette, L. Delannay, T. Jodlowsi, J. Giovanol - sylvain.dancette@uclouvain.be | ||
| 23 | MS04-250 | A mixed experimental/numerical approach to sheet metal plastic modeling, with application to the prediction of the Forming Limit Curves |
| R. Makkouk, X. Lemoine, M. Teaca, I. Charpentier, M. Martiny, G. Ferron - mihaela_teaca@yahoo.fr | ||
| 24 | MS04-284 | Hole expansion simulation of high strength steel sheet |
| K. Hashimoto, T. Kuwabara, E. Iizuka, J.W. Yoon - kuwabara@cc.tuat.ac.jp | ||
| 25 | MS04-329 | Integration of constitutive equations with a new explicit scheme |
| M. Halilovič, M. Vrh, B. Štok - boris.stok@fs.uni-lj.si | ||
| 26 | MS04-337 | Forming limit studies on different thickness aluminium 6xxx series alloys used in automotive applications |
| R. Bhattacharya, M. Stanton, I. Dargue, G. Williams, R. Aylmore - r.bhattacharya@warwick.ac.uk | ||
| Thursday, April 8th - 10:45 - 12:45 | ||
| Room N6 | MS10 - Structures, properties and processing of polymers | |
| Chair | J. F. Agassant | |
| 21 | MS10-324 | Ultrasonic Welding. Simulation of the flow at the interface |
| A. Levy, S. Le Corre, A. Poitou, E. Soccard - arnaud.poitou@ec-nantes.fr | ||
| 22 | MS10-252 | Optical measurement and numerical simulation of parison formation in blow moulding |
| Y. B´ereaux, J-Y. Charmeau, J. Balcaen - yves.bereaux@insa-lyon.fr | ||
| 23 | MS10-256 | Viscoelastic material models of Polypropylene for thermoforming applications |
| C. P. J. O’Connor, P. J. Martin, G. Menary - ciaran.oconnor@qub.ac.uk | ||
| 24 | MS10-258 | Influence of crystallinity on gas barrier properties and mechanical properties of PLA food packaging films |
| A.Guinault, C. Sollogoub, S.Domenek, A.Grandmontagne, V. Ducruet - alain.guinault@cnam.fr | ||
| Thursday, April 8th - 10:45 - 12:45 | ||
| Room N7 | MS16 - Incremental forming | |
| Chair | L. Filice | |
| 1 | MS16-7 | Material Flow Analysis In The Incremetal Forging Technology |
| J. Nowak, L. Madej, F. Grosman, M. Pietrzyk - lmadej@agh.edu.pl | ||
| 2 | MS16-62 | Experimental study about the surface quality of the medical implants obtained by incremental forming |
| V. Oleksik, A. Pascu, C. Deac, R. Fleacă, O. Bologa, G. Racz - valentin.oleksik@ulbsibiu.ro | ||
| 3 | MS16-100 | Combined Kinematic/Isotropic Hardening Behavior Study for Magnesium Alloy Sheets to Predict Ductile Fracture of Rotational Incremental Forming |
| N. Duc-Toan, P. Jin-Gee, K. Young-Suk - ductoan@knu.ac.kr | ||
| 4 | MS16-117 | Manufacturing of Complex Functional Graded Workpieces with the Friction Spinning Process |
| W. Homberg, D. Hornjak, C. Beerwald - dh@luf.upb.de | ||
| 5 | MS16-120 | The Significance of Friction in the Single Point Incremental Forming Process |
| P. Eyckens, J. Duflou, A. Van Bael, P. Van Houtte - philip.eyckens@mtm.kuleuven.be | ||
| 6 | MS16-170 | Preliminary studies on single point incremental forming for composite material |
| M. Fiorotto, M. Sorgente, G. Lucchetta - giovanni.lucchetta@unipd.it | ||
| Thursday, April 8th - 10:45 - 12:45 | ||
| Room N8 | MS15 - New and advanced numerical strategies for material forming | |
| Chair | E. Cueto | |
| 1 | MS15-6 | Numerical simulation of strain inhomogeneities during plain strain compression on the basis of the digital material representation |
| L. Madej - lmadej@agh.edu.pl | ||
| 2 | MS15-11 | Elastic-plastic work-hardening deformation under combined bending and torsion and residual stresses in helical springs |
| V. Kobelev - kobelev@imr.mb.uni-siegen.de | ||
| 3 | MS15-15 | SUPG-based stabilization using Separated Representations Approach |
| D. González, L. Debeugny, E. Cueto, F. Chinesta, P. Díez, A. Huerta - gonzal@unizar.es | ||
| 4 | MS15-26 | NS-FEM/ES-FEM for contact problems in metal forming analysis |
| C. Xiangyang, L. Guangyao, Z. Gang, W. Suzhen - pwcuixy@gmail.com | ||
| 5 | MS15-64 | A linearly conforming radial point interpolation method (LC-RPIM) for contact problems in metal forming analysis |
| Z. Gang, C. Xiangyang, L. Guangyao, W. Suzhen - zhenggang03@gmail.com | ||
| 6 | MS15-70 | Meshing Strategies for the Efficient Computation of Laser Beam Forming Processes on Large Aluminium Plates |
| I. Pitz, A. Otto, M. Schmidt - indra.prithwani@lpt.uni-erlangen.de | ||
| Thursday, April 8th - 10:45 - 12:45 | ||
| Room SC | MS07 - Extrusion and drawing | |
| Chair | H. S. Valberg | |
| 1 | MS07-127 | Modeling and Simulation of dynamic microstructure evolution of aluminium alloys during thermomechanically coupled extrusion process |
| F. Parvizian, T. Kayser, B. Klusemann, B. Svendsen - farhad.parvizian@udo.edu | ||
| 2 | MS07-164 | Study of isothermal extrusion of aluminium using finite element simulations |
| A. Farjad Bastani, T. Aukrust, S. Brandal - amin.farjad@sintef.no | ||
| 3 | MS07-270 | Magnesium sheet production By Using The Extrusion Process |
| S. Gall, S. Mueller, W. Reimers - s.gall@tu-berlin.de | ||
| 4 | MS07-289 | Comparison of different FEM code approaches in the simulation of the die deflection during aluminium extrusion |
| L. Donati, N. Ben Khalifa, L. Tomesani, A. E. Tekkaya - l.donati@unibo.it | ||
| 5 | MS07-294 | Deformation conditions in the extrusion weld zone when using pointed and square ended bridge |
| Y.A. Khan, H.S. Valberg, B.O.T Jacobsen - yawar.abbas@ntnu.no | ||
| Thursday, April 8th - 14:00 - 16:00 | ||
| Room N3 | MS18 - Non-conventional processes | |
| Chair | H. P. Schulze – L. Santo | |
| 1 | MS18-156 | Micro EDM with the in situ electrochemical fabrication and regeneration of the tungsten microelectrode tool |
| G. Girardin, Y. Layouni, P. Morin, M. Cabrera - michel.cabrera@univ-lyon1.fr | ||
| 2 | MS18-80 | Thermal-morphological analysis of diode laser polishing on sintered bronze |
| A. Gisario, D. Bellisario, F. Veniali - annamaria.gisario@uniroma1.it | ||
| 3 | MS18-84 | Microstructure and texture of copper/niobium composites processed by ECAE |
| E. Buet, J.B. Dubois, P. Olier, L. Thilly, F. Lecouturier, P.O. Renault - patrick.olier@cea.fr | ||
| 4 | MS18-96 | Springback analysis of thin bent sheets on elastomeric die |
| M.T. Braga, L.A. Moreira Filho, M.A. Menezes - mtbraga@ita.br | ||
| 5 | MS18-133 | FSW of AA2198-T3 butt joints for aeronautical applications |
| C.Bitondo, U.Prisco, A.Squillace, G.Giorleo, P.Buonadonna, G.Dionoro, G.Campanile, A. Astarita - ciro.bitondo@unina.it | ||
| 6 | MS18-32 | Roll casting of net-inserted aluminium alloy strip |
| T. Haga, K. Takahashi, R. Nakamura, H. Watari - haga@med.oit.ac.jp | ||
| Thursday, April 8th - 14:00 - 16:00 | ||
| Room N4 | MS17 - Innovative joining by forming technologies | |
| Chair | M. Merklein | |
| 1 | MS17-18 | Finite Element Modeling of Resistance Spot Welding Process |
| P. Chigurupati, B. H. Chun, A. Bandar, W. T. Wu - pchigurupati@deform.com | ||
| 2 | MS17-22 | Self piercing riveting for metal-polymer joints |
| L. Settineri, E. Atzeni, R. Ippolito - luca.settineri@polito.it | ||
| 3 | MS17-49 | Enlargement of the application range of solid punch riveting by two-piece dies |
| R. Neugebauer, F. Jesche, M. Israel - markus.israel@iwu.fraunhofer.de | ||
| 4 | MS17-90 | AA8090 Al-Li alloy FSW parameters to minimize defects and increase fatigue life |
| E. Lertora, C. Gambaro - e.lertora@unige.it | ||
| 5 | MS17-116 | Effect of the w/v ratio and sheet thickness on mechanical properties of magnesium alloy FSW-ed joints |
| C. Bruni, A. Forcellese, F. Gabrielli, M. Simoncini - m.simoncini@univpm.it | ||
| 6 | MS17-128 | The Influence of Process Parameters and Tool Geometry on Mechanical Properties of Friction Stir Welded Aluminum Lap Joints |
| G. D’Urso, C. Giardini - durso@unibg.it | ||
| Thursday, April 8th - 14:00 - 16:00 | ||
| Room N5 | MS12 - Semi-solid processes | |
| Chair | Y. Birol | |
| 9 | MS12-229 | Friction coefficients evaluation for steel thixoforging |
| JC. Pierret, A. Rassili, G. Vaneetveld, R. Bigot, J. Lecomte-Beckers - jc.pierret@ulg.ac.be | ||
| 10 | MS12-221 | Results of experimental investigations of tool steel during forming in semi-solid state |
| P. Macioł, W. Zalecki, R. Kuziak - pmaciol@agh.edu.pl | ||
| 11 | MS12-203 | Thixoforming of spray formed M2 tool steel |
| J. Dutkiewicz, Ł. Rogal, K. Sołek, Z. Mitura, P. Kapranos - nmdutkie@imim-pan.krakow.pl | ||
| 12 | MS12-50 | Ni- and Co-based superalloys as potential tool materials for thixoforming of steels |
| Y. Birol - yucel.birol@mam.gov.tr | ||
| 13 | MS12-37 | Characterizing and Optimizing Structure Homogeneity in the Thixoforming of Steel Process |
| A. Berrado, A. Rassili - berrado@emi.ac.ma | ||
| 14 | MS12-348 | Thermal fatigue properties of laser treated steels at semi-solid processing temperature |
| S.N. Aqida, F. Calosso, D. Brabazon, S. Naher, M. Rosso - dermot.brabazon@dcu.ie | ||
| Thursday, April 8th - 14:00 - 16:00 | ||
| Room N6 | MS13 - Heat transfer modelling | |
| Chair | K. Mocellin | |
| 1 | MS13-60 | Heat transfer analysis of injection moulding of fiber-reinforced poly(m-xylylene adipamide) |
| R. Le Goff, N. Boyard, V. Sobotka, D. Delaunay - nicolas.boyard@univ-nantes.fr | ||
| 2 | MS13-83 | A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics |
| M. Bordival, F. M. Schmidt, Y. Le Maoult, B. Cosson, B. Plantamura - bordival@mines-albi.fr | ||
| 3 | MS13-141 | Simulation of Distortion due to Non-uniform Cooling in Aluminium Extrusion Process |
| S. Bikass, B. Andersson, A.Pilipenko - Saeed.Bikass@sintef.no | ||
| 4 | MS13-151 | Interlaboratory comparison for heat transfer coefficient identification in hot stamping of high strength steels |
| P. Bosetti, S. Bruschi, T. Stoehr, J. Lechler, M. Merklein - stefania.bruschi@ing.unitn.it | ||
| 5 | MS13-167 | Experimental study of thermal sliding contact parameters at interface seat of large strains |
| B. Bouruoga, E. Guillot, B. Garnier, L. Dubar - brahim.bourouga@univ-nantes.fr | ||
| Thursday, April 8th - 14:00 - 16:00 | ||
| Room N7 | MS16 - Incremental forming | |
| Chair | J. Duflou | |
| 7 | MS16-181 | Driving - A Flexible Manufacturing Method for Individualized Sheet Metal Product |
| D. Scherer, Z. Yang, H. Hoffmann - ds@utg.de | ||
| 8 | MS16-200 | Optimal tool-path design to reduce thinning in ISF process |
| G. Ambrogio, L. Filice, M. Gaudioso, G. L. Manco - l.filice@unical.it | ||
| 9 | MS16-243 | Single point incremental forming simulation with an enhanced assumed strain solid-shell finite element formulation |
| J. I. V. Sena, R. J. Alves de Sousa, R. A. F. Valente - sena.ilidio@gmail.com | ||
| 10 | MS16-274 | Experimental investigation of tool path strategies for incremental necking-in |
| L.Kwiatkowski, O.Melsheimer, S.Wenzel, J.Kunert, A.E.Tekkaya - lukas.kwiatkowski@iul.tu-dortmund.de | ||
| 11 | MS16-277 | Experimental and numerical study of a milling machine-based dieless incremental sheet forming |
| M. Tisza, I. Panity, P.Z. Kovács - tisza.miklos@uni-miskolc.hu | ||
| 12 | MS16-292 | An Experimental Study of Twist Phenomena in Single Point Incremental Forming |
| H. Vanhove, J. Verbert, J. Gu, I. Vasilakos, J.R. Duflou - hans.vanhove@mech.kuleuven.be | ||
| Thursday, April 8th - 14:00 - 16:00 | ||
| Room N8 | MS15 - New and advanced numerical strategies for material forming | |
| Chair | R. N. Jorge | |
| 7 | MS15-86 | Recent advances in material homogenization |
| H. Lamari, A. Ammar, P. Cartraud, F. Chinesta, F. Jacquemin, G. Legrain - Hajer.Lamari@ec-nantes.fr | ||
| 8 | MS15-175 | Study of Sandwich Shells with Metallic Foam Cores |
| H. Mata, R. Natal Jorge, A. A. Fernandes, R. A. F. Valente - dem09005@fe.up.pt | ||
| 9 | MS15-194 | Numerical implicit strategies for wrinkling prediction in free and flange forming of anisotropic sheets |
| M. P. Henriques, R. J. Alves de Sousa, R. A. F. Valente - marisaphenriques@ua.pt | ||
| 10 | MS15-213 | A simulation study of the effect of some parameters in thermal analysis of Creep Feed Grinding |
| S. Santos, M. P. L. Parente, A. Aguiar Vieira, A. Monteiro Baptista, R. M. Natal Jorge - rnatal@fe.up.pt | ||
| 11 | MS15-260 | A remeshing strategy for three dimensional elasto-plasticity coupled with damage applicable to forming processes |
| H. R. Javani, R. H. J. Peerlings, M. G. D. Geers - h.javani@tue.nl | ||
| Thursday, April 8th - 14:00 - 16:00 | ||
| Room SC | MS07 - Extrusion and drawing | |
| Chair | L. Tomesani | |
| 6 | MS07-299 | Metal flow in idealised a-symmetric 2D extrusion welding |
| Y.A. Khan, H.S. Valberg - yawar.abbas@ntnu.no | ||
| 7 | MS07-308 | Comparison of metal flow in un-lubricated direct and indirect extrusion of Al-alloys |
| H. Valberg - henry.valberg@ntnu.no | ||
| 8 | MS07-309 | Understanding metal flow in aluminium extrusion by means of emptying diagrams |
| H. Valberg - henry.valberg@ntnu.no | ||
| 9 | MS07-313 | Evaluation of different FE simulation codes in the stress analysis of extrusion dies |
| B. Reggiani, L. Donati, L. Tomesani - barbara.reggiani@mail.ing.unibo.it | ||
| 10 | MS07-331 | Use of a shadowing tongue to reduce elastic die deflections |
| I. Irgens, D. Nolte, H. Valberg - henry.valberg@ntnu.no | ||
| Thursday, April 8th - 16:30 - 17:30 | ||
| Room N3 | MS18 - Non-conventional processes | |
| Chair | L. Slatineanu- H. P. Schulze | |
| 7 | MS18-191 | Multiple combinations of conventional and non-conventional processes |
| H.-P. Schulze - hans-peter.schulze@ovgu.de | ||
| 8 | MS18-192 | A miniaturized machine for micro-sheet forming |
| L. Santo, F. Quadrini, F. Trovalusci - federica.trovalusci@uniroma2.it | ||
| 9 | MS18-244 | Numerical modelling of laser rapid prototyping by fusion wire deposit |
| L. Arbaoui, J.-E. Masse, L. Barrallier, K. Mocellin - larbi.arbaoui@mines-paristech.fr | ||
| Thursday, April 8th - 16:30 - 17:30 | ||
| Room N4 | MS17 - Innovative joining by forming technologies | |
| Chair | L. Fratini | |
| 7 | MS17-143 | Numerical modeling of the Linear Friction Welding process |
| E. Ceretti, L. Fratini, C. Giardini, D. La Spisa - fratini@dtpm.unipa.it | ||
| 8 | MS17-184 | On the influence of Friction Stir Welding in the elasto-plastic buckling load-carrying capacity of extruded Integrally Stiffened Panels for aeronautic applications |
| R. A. F. Valente, J. W. Yoon, G. H. Bray, T. E. R. Childs - robertt@ua.pt | ||
| 9 | MS17-197 | Geometry effect assessment on mechanical performance of forge welded pipe |
| J.Y. Liu, P.T. Moe, S.M. Ganesan, Z.L. Zhang, B. Salberg, J.S. Burnell-Gray, W. Rudd - ganesan.s.m@ntnu.no | ||
| Thursday, April 8th - 16:30 - 17:30 | ||
| Room N5 | MS12 - Semi-solid processes | |
| Chair | A. Forn | |
| 15 | MS12-20 | Semi-solid forming of non axis-symmetric parts from steel grade X210CrW12 with PVD coated tools |
| G. Hirt, K. Bobzin, L. Khizhnyakova, M. Ewering, N. Bagcivan - khizhnyakova@ibf.rwth-aachen.de | ||
| 16 | MS12-147 | PVD coated hot work tool steels for tooling applications in semi-solid processing of steels |
| D. Isler, Y. Birol, M. Urgen - duyguisler@gmail.com | ||
| 17 | MS12-349 | Surface modification of HVOF of thermal sprayed WC–CoCr coatings by laser treatment |
| E. Chikarakara, S. Aqida, D. Brabazon, Naher, J.A. Picas, M. Punset, A. Forn - dermot.brabazon@dcu.ie | ||
| Thursday, April 8th - 16:30 - 17:30 | ||
| Room N6 | MS14 - Light weight design and energy efficiency in metal forming | |
| Chair | E. Tekkaya – M. Marre | |
| 1 | MS14-29 | Additional forming elements for a local reinforcement in deep drawn parts |
| K. Voges-Schwieger, S. Hübner, B.-A. Behrens - voges-schwieger@ifum.uni-hannover.de | ||
| 2 | MS14-78 | Improvement of buckling resistance of thin sheets by local laser treatment |
| G. Figala, B. Buchmayr - gerald.figala@unileoben.ac.at | ||
| 3 | MS14-104 | Further Processing of UltraFine-Grain Materials |
| C. Taplick, F. Rullmann, P. Groche - taplick@ptu.tu-darmstadt.de | ||
| Thursday, April 8th - 16:30 - 17:30 | ||
| Room N7 | MS16 - Incremental forming | |
| Chair | C. Giardini | |
| 13 | MS16-293 | Material data identification to model the single point incremental forming process |
| C. Bouffioux, P. Pouteau, L. Duchêne, H. Vanhove, J.R. Duflou, A.M. Habraken - chantal.bouffioux@ulg.ac.be | ||
| 14 | MS16-295 | Influence of thickness on formability in 6082-T6 |
| G.L. Manco, G. Ambrogio - g.ambrogio@unical.it | ||
| 15 | MS16-325 | Development of a simplified approach for incremental sheet forming |
| C. Robert, L. Ben Ayed, A. Delamézière, P. Dal Santo, J.-L. Batoz - camille.robert@insic.fr | ||
| Thursday, April 8th - 16:30 - 17:30 | ||
| Room N8 | MS15 - New and advanced numerical strategies for material forming | |
| Chair | E. Cueto | |
| 12 | MS15-301 | A new continuum shell finite element for sheet metal forming applications |
| M. Schwarze, I. N. Vladimirov, S. Reese - marco.schwarze@tu-bs.de | ||
| 13 | MS15-303 | An improvement of Flow Front computation through Bézier Shape Deformation guaranteeing mass conservation law |
| L. Hilario Pèrez, N. Montés, A. Falcó, F. Sánchez - luciah@uch.ceu.es | ||
| 14 | MS15-345 | Methodology of the shape optimization of forging dies |
| F. Meng, C. Labergere, P. Lafon - fanjuan.meng@utt.fr | ||
| Thursday, April 8th - 16:30 - 17:30 | ||
| Room SC | MS05 - Sheet and tube hydroforming | |
| Chair | E. Massoni | |
| 1 | MS05-339 | Hydroforming applications in automotive: a review |
| M. Tolazzi - massimo.tolazzi@crf.it | ||
| 2 | MS05-54 | Friction in Asymmetric Feeding Tube Hydroforming |
| A. Fiorentino, E. Ceretti, D. Braga, R. Marzi - antonio.fiorentino@ing.unibs.it | ||
| 3 | MS05-101 | Numerical simulation of hydro forming at elevated temperatures with granular material used as medium compared to the real part geometry |
| M. Grüner, M. Merklein - m.gruener@lft.uni-erlangen.de | ||
| Friday, April 9th - 9:30 - 10:30 | ||
| Room N3 | MS18 - Non-conventional processes | |
| Chair | L. Santo - L. Slatineanu | |
| 10 | MS18-247 | Intricate shape prototypes obtained by FDM |
| A. Boschetto, F. Veniali - alberto.boschetto@uniroma1.it | ||
| 11 | MS18-266 | Thermal Phenomena At The Laser Beam Machining |
| L. Slătineanu, M. Coteaţă, I. Beşliu, O. Dodun - slati@tcm.tuiasi.ro | ||
| 12 | MS18-269 | Study on the dry electrical discharge machining |
| Irina Beşliu, Hans-Peter Schulze, Margareta Coteaţă, Dumitru Amarandei - mcoteata@tcm.tuiasi.ro | ||
| Friday, April 9th - 9:30 - 10:30 | ||
| Room N4 | MS17 - Innovative joining by forming technologies | |
| Chair | M. Merklein | |
| 10 | MS17-198 | Shielded Active Gas Forge Welding - From Laboratory to Field Experiments |
| P.T. Moe, B. Salberg, K. Rabben, B. Halmrast, J.I. Audestad, J.S. Burnell-Gray, W. Rudd - ganesan.s.m@ntnu.no | ||
| 11 | MS17-199 | Joining of lightweight frame structures by die-less hydroforming |
| M. Marré, S. Gies, F. Maevus, A. E. Tekkaya - michael.marre@iul.tu-dortmund.de | ||
| 12 | MS17-225 | On the Self-Piercing Riveting of Aluminium blanks and Carbon Fibre Composite Panels |
| G. Di Franco, L. Fratini, A. Pasta, V. F. Ruisi - fratini@dtpm.unipa.it | ||
| Friday, April 9th - 9:30 - 10:30 | ||
| Room N5 | MS06 - Forging and rolling | |
| Chair | J. L. Chenot | |
| 5 | MS06-81 | Material flow of a warm formed profile considering the pre-treatment of the material |
| O. Harrer, B. Buchmayr, S. Wallner - otto.harrer@unileoben.ac.at | ||
| 6 | MS06-119 | Cooling and Lubrication of Automated Forging Processes with High-Pressure Systems |
| B.-A. Behrens, I. Lueken, D. Odening - lueken@ifum.uni-hannover.de | ||
| 7 | MS06-150 | FE modelling of large ingot hot forging |
| D. Scarabello, A. Ghiotti, S. Bruschi - stefania.bruschi@ing.unitn.it | ||
| Friday, April 9th - 9:30 - 10:30 | ||
| Room N6 | MS14 - Light weight design and energy efficiency in metal forming | |
| Chair | E. Ceretti | |
| 4 | MS14-111 | A New Process Chain for forming individually curved sheet stringers |
| F. Bäcker1, M. Ertuğrul, P. Groche - baecker@ptu.tudarmstadt. | ||
| 5 | MS14-182 | A New Method for 3D Forming of Extrusion-Based Sheets for Light-Weight Hull Applications |
| T. Welo - torgeir.welo@ntnu.no | ||
| 6 | MS14-204 | Light weight design of rotary swaged components and optimisation of the swaging process |
| V. Piwek, B. Kuhfuss, E. Moumi, M. Hork - piwek@bime.de | ||
| Friday, April 9th - 9:30 - 10:30 | ||
| Room N7 | MS02 - Multiscale approaches | |
| Chair | A. M. Habraken | |
| 1 | MS02-30 | On the evolution of the crystallographic texture of cubic polycrystals in coaxial processes |
| J. Kalisch, A. Bertram - jan.kalisch@ovgu.de | ||
| 2 | MS02-61 | A polycrystal model to evaluate mechanical properties of asymetrically rolled Al sheets |
| R.J. Alves de Sousa, F.J.P. Simões, J.-W. Yoon - rsousa@ua.pt | ||
| 3 | MS02-105 | Experimental identification and validation of a crystal plasticity model for a low carbon steel on different length scales |
| T. Hoffmann, A. Bertram, H. Bei, J.Z. Tischler, B.C. Larson - albrecht.bertram@ovgu.de | ||
| Friday, April 9th - 9:30 - 10:30 | ||
| Room N8 | MS05 - Sheet and tube hydroforming | |
| Chair | E. Massoni | |
| 4 | MS05-103 | Characterization of a magnetorheological fluid with respect to its suitability for hydroforming |
| M. Merklein, S. Rösel - s.roesel@lft.uni-erlangen.de | ||
| 5 | MS05-233 | Pre-bulging influence on a inverse drawn shape obtained with Hydromechanical Deep Drawing (HDD) |
| G. Papadia, A. Del Prete, A. Spagnolo, A. Anglani - gabriele.papadia@unisalento.it | ||
| 6 | MS05-234 | Blank Shape Optimization in Sheet Metal Hydromechanical Deep Drawing (HDD) |
| G. Papadia, A. Del Prete, B. Manisi, A. Anglani - gabriele.papadia@unisalento.it | ||
| Friday, April 9th - 10:50 - 12:50 | ||
| Room N3 | MS18 - Non-conventional processes | |
| Chair | L. Slatineau – L. Santo | |
| 13 | MS18-283 | Non-conventional technologies for the manufacturing of anti-intrusion bars |
| M. Strano, V. Mussi, M. Monno - matteo.strano@polimi.it | ||
| 14 | MS18-291 | Study of fibre laser machining of C45 steel: influence of process parameters on material removal rate and roughness |
| S. Genna, C. Leone, V. Lopresto, L. Santo, F. Trovalusci - federica.trovalusci@uniroma2.it | ||
| 15 | MS18-297 | Apparent spot in circular laser hardening: effect of process parameters |
| L.Giorleo, A.Liu, B.Previtali - anmin.liu@mail.polimi.it | ||
| 16 | MS18-298 | Through optical combiner monitoring of fiber laser processes |
| D.Colombo, B.Previtali - daniele.colombo@mecc.polimi.it | ||
| 17 | MS18-304 | Fiber Laser Cladding with High Content of Wc-Co Based Powder |
| B. Valsecchi, B. Previtali, M. Vedani, G. Vimercati - bruno.valsecchi@mecc.polimi.it | ||
| 18 | MS18-328 | Hybrid Metal-Plastic Joining by means of LASER |
| A. Fortunato, G. Cuccolini, A. Ascari, L. Orazi, G. Campana, G. Tani - a.ascari@unibo.it | ||
| Friday, April 9th - 10:50 - 12:50 | ||
| Room N4 | MS17 - Innovative joining by forming technologies | |
| Chair | L. Fratini | |
| 13 | MS17-261 | A new Friction Stir Welding based technique for corner fillet joints: experimental and numerical study |
| G. Buffa, L. Fratini, B. Arregi, M. Penalva - g.buffa@dtpm.unipa.it | ||
| 14 | MS17-300 | Friction Stir Welding using unthreaded tools: analysis of the flow |
| O. Lorrain, V. Favier, H. Zahrouni, D. Lawrjaniec - veronique.favier@paris.ensam.fr | ||
| 15 | MS17-306 | Friction Stir Processing of NiTi shape memory alloy: microstructural characterization |
| A. Barcellona, L. Fratini, D. Palmeri, C. Maletta, M. Brandizzi - palmeri@dtpm.unipa.it | ||
| 16 | MS17-317 | Performance variability of Aluminium hybrid lap-joints obtained by means of adhesives and ultrasonic welding |
| M. Annoni, F. Moroni, V. Mussi - massimiliano.annoni@polimi.it | ||
| 17 | MS17-330 | Optimization of the forming sequence of a threaded insert with groves by means of FE simulation |
| S. Stignani, S. Tampieri, L. Donati, L. Tomesani, M. Generali - simone.stignani@far.bo.it | ||
| 18 | MS17-341 | Development of a mechanical joining process for automotive body-in-white production |
| S. Busse, M. Merklein, K. Roll, M. Ruther, M Zürn - Stephan.Busse@daimler.com | ||
| Friday, April 9th - 10:50 - 12:50 | ||
| Room N5 | MS06 - Forging and rolling | |
| Chair | L. Fourment | |
| 8 | MS06-159 | Numerical Investigations on the Fatigue Failure of Forging Tools due to Thermo-Mechanical Cyclic Loading |
| B.-A. Behrens, A. Bouguecha, H. W. Raedt - hadifi@ifum.uni-hannover.de | ||
| 9 | MS06-196 | Establishment of heat treatment cycles for forge welded API L80 tubular joints |
| S. Ganesan, P. Moe, P. Vinothkumar, J. Audestad, B. Salberg, H. Valberg, J. Solberg, J. Burnell-Gray, W. Rudd - ganesan.s.m@ntnu.no | ||
| 10 | MS06-262 | Manufacturing of complex functional components with variants by using a new metal forming process - sheet-bulk metal forming |
| M. Merklein, J. Koch, T. Schneider, S. Opel, U. Vierzigmann - koc@lft.uni-erlangen.de | ||
| 11 | MS06-280 | A study on forging of Aluminum-based metal matrix composites |
| Y.-C. Ho, F.-K. Chen, S. Torng - fkchen@ntu.edu.tw | ||
| 12 | MS06-290 | Effect of transient change in strain rate on plastic flow behaviour of Al-Zn-Mg-Cu alloy at elevated temperatures |
| P. Petrov, B.-A. Behrens, H. Conrads - petrov_p@mail.ru | ||
| 13 | MS06-338 | Finite element modelling of forging and other metal forming processes |
| J.-L. Chenot, L. Fourment, R. Ducloux, E. Wey - jean-loup.chenot@mines-paristech.fr | ||
| Friday, April 9th - 10:50 - 12:50 | ||
| Room N6 | MS14 - Light weight design and energy efficiency in metal forming | |
| Chair | M. Marre | |
| 7 | MS14-207 | Tailor Made Blanks for the Aerospace Industry |
| J. Sinke, C. Iacono, A.A. Zadpoor - ir.j.sinke@gmail.com | ||
| 8 | MS14-240 | Direct recycling of 1050 aluminum alloy scrap material mixed with 6060 aluminum alloy chips by hot extrusion |
| V. Güley, N. Ben Khalifa, A. E. Tekkaya - volkan.gueley@iul.tu-dortmund.de | ||
| 9 | MS14-257 | Thermo Mechanical Behaviour of Metal Matrix Composite Structures |
| M. Wedekind, J. Both, H. Baier - wedekind@llb.mw.tum.de | ||
| 10 | MS14-314 | A new testing machine to determine the behaviour of aluminium granulate under combined pressure and shear |
| F.Widerøe, T.Welo, H.Vestøl - fredrik.wideroe@ntnu.no | ||
| Friday, April 9th - 10:50 - 12:50 | ||
| Room N7 | MS02 - Multiscale approaches | |
| Chair | S. Bouvier | |
| 4 | MS02-134 | Semi phenomenological modelling of the behaviour of TRIP steels- Application to sheet metal forming |
| R. Kubler, M. Berveiller, P. Buessler, X. Lemoine - regis.kubler@ensam.eu | ||
| 5 | MS02-172 | On the modeling of dual phase steels: Microstructure-based simulation from the hot rolled sheet to the deep drawn component |
| A. Butz, S. Lossau, B. Springub, F. Roters - alexander.butz@iwm.fraunhofer.de | ||
| 6 | MS02-185 | Mesoscopic models of woven: a general strategy based on the minimization of the potential energy involving genetic algorithms |
| B. Boubaker, J.F. Ganghoffer - jean-francois.Ganghoffer@ensem.inpl-nancy.fr | ||
| 7 | MS02-193 | Evaluation of Poisson's ratio of textiles from mesoscopic models |
| B. Ben Boubaker, M. Assidi, J.F. Ganghoffer - mohamed.assidi@mines-paristech.fr | ||
| Friday, April 9th - 10:50 - 12:50 | ||
| Room N8 | MS05 - Sheet and tube hydroforming | |
| Chair | M. Tolazzi | |
| 7 | MS05-296 | Numerical analyses of tube hydroforming problem using artificial neural networks |
| T. Belhadj, F. Abbassi, S. Mistou, A. Zghal - touhamibelhadj@yahoo.fr | ||
| 8 | MS05-302 | Modified hydraulic bulging in acquisition of stress – strain curve |
| M. Skunca1, M. D. Math, B. Grizelj - marko.skunca@fsb.hr | ||
| 9 | MS05-321 | Formability Extension of Aerospace Alloys for Tube Hydroforming Applications |
| M. Anderson, P. Bocher, J. Gholipour, F. Bridier, J. Savoie, P. Wanjaca - melissa.anderson.1@ens.etsmtl.ca | ||
| 10 | MS05-35 | Optimization of process parameters and part geometry for high diameter tube hydroforming |
| E. Ceretti, D. Braga, C. Giardini - elisabetta.ceretti@unibs.it | ||
| Friday, April 9th - 10:50 - 12:50 | ||
| Room SC | MS08 - Nano-structured materials and microforming | |
| Chair | A. Rosochowski | |
| 1 | MS08-72 | High strength ultra-fine grained Ti produced via a novel processing route |
| J.M. Molina-Aldareguia, M.T. Perez-Prado, R.Z. Valiev, G.I. Raab, D.V. Gunderov, I. Sabirov - ilchat.sabirov@imdea.org | ||
| 2 | MS08-33 | Microforming of Al-Si alloy foil by cold rolling |
| T. Haga, K. Inoue, H. Watari - haga@med.oit.ac.jp | ||
| 3 | MS08-73 | Application of equal channel angular pressing with parallel channels for grain refinement in Al alloys and its effect on deformation behavior |
| I. Sabirov, M.T. Perez-Prado, M. Murashkin, J.M. Molina-Aldareguia, E.V. Bobruk, N.F. Yunusova, R.Z. Valiev - ilchat.sabirov@imdea.org | ||
| 4 | MS08-146 | Surface profiling of micro-scale structures using Partial Differential Equations |
| G. González Castro, R. Spares, H. Ugail, B. R. Whiteside, J. Sweeney - g.gonzalezcastro1@bradford.ac.uk | ||
| 5 | MS08-239 | Tribological influence of tool surface topography within microforming |
| R.S. Eriksen, S. Weidel, H.N. Hansen - rser@mek.dtu.dk | ||
| 6 | MS08-319 | FE simulation of micro-extrusion of a conical pin |
| M. Rosochowska, A. Rosochowski, L. Olejnik - m.rosochowska@strath.ac.uk |